Putting up a multi-TV wall mount sounds exciting, right? It makes your space look cool, modern, and professional. But here’s the thing—not everyone gets it right the first time.
A few small mistakes can lead to crooked screens, messy cables, or the whole setup falling apart. Don’t worry, though. This guide will help you avoid those goof-ups and get it done the right way.
Let’s go through what not to do—and what you should do instead.
Skipping the Instructions
Some people think they can wing it. They open the box, grab some tools, and start drilling. Bad idea!
Every multi TV wall mount comes with instructions that tell you how much weight the mount can hold, where to fix it, and how to line up the screens.
What to do: Read the complete manual first. Check the sizes of your TVs. Make sure your wall can handle the load. Trust the guide—it’s there to help you.
Weak or Wobbly Walls
Not every wall is ready for a heavy setup. If you screw the mount into a weak surface, it might not hold for long, and your TVs could tilt, sag, or even fall.
What to do: Always test the wall first. It should be strong, flat, and sturdy. Use proper wall anchors or metal brackets. If you’re unsure, get help from someone who knows walls well.
Bad Cable Management
Are loose wires hanging down everywhere? That’s not just messy—it’s dangerous. Wires can get pulled, twisted, or cut during use.
What to do: Plan where each cable goes. Use clips, covers, or cable tracks to hide them. Leave some extra slack for movement so nothing gets tugged too tight.
This keeps your setup safe, clean, and easy to look at.
See also: The Rise of Smart Cities: How Technology Is Shaping Urban Living
Mounting the TVs Too High or Too Low
If you don’t measure the height right, people might have to tilt their necks to watch the screen. Or worse—the screens may not line up correctly at all.
What to do: Mark out the full size of your video wall using tape. Sit or stand where viewers will be and see if it feels right. Adjust before drilling.
A little planning now saves a lot of adjusting later.
Not Leveling the Screens
If you don’t align your TVs, one will be higher or lower than the others, making your setup look off.
What to do: Use a level tool when installing every mount. Double-check after tightening the screws. If your mount has adjustment knobs, use them to fine-tune each screen.
Even a tiny tilt can ruin the clean look.
Forgetting About Heat and Ventilation
Stacking multiple TVs close together means they’ll heat up fast. No airflow means more risk of damage.
What to do: Leave space between the wall and the screens. Make sure air can flow freely behind the TVs. If needed, use small fans or vents to keep things cool.
This helps your screens last longer and work better.
Using the Wrong Mount for the Job
Not all wall mounts are made for multiple TVs. Some are for just one screen. If you use the wrong kind, it can lead to poor fit or poor support.
What to do: Choose a proper multi-TV wall mount made to hold more than one screen. These mounts are designed to align screens evenly and safely carry extra weight.
Evig, an audio video solution provider in Dubai, offers strong mounting options for schools, offices, control rooms, and even retail shops.
Doing It All Alone
Are you trying to lift and align large screens by yourself? That’s risky. You can damage the screen, hurt yourself, or have a crooked wall.
What to do: Always have at least one more person with you. Teamwork makes setup easier and safer. One person can hold while the other adjusts.
You’ll also finish quicker—and it’ll look way better.
Final Thoughts
Setting up a multi-TV wall mount doesn’t have to be hard, but it does need a little care. If you skip or rush through the process, it can lead to broken screens, bad alignment, or even safety problems.
The best way to avoid all that is to take your time, follow the manual, use the right tools, and don’t be afraid to ask for help if something feels off.
Evig, an audio video solution provider in Dubai, offers professional-grade display mounting systems for all kinds of spaces, big and small. But no matter what product you use, the real magic is how you install it.
Do it right, and your video wall won’t just look amazing—it’ll work perfectly, too.
